Filter
Top Products
21 Chapter 3
The jumper settings are schematically depicted in this manual as follows:
A
pair of needle-nose pliers may be helpful when working with jumpers. If
you have any doubts about the best hardware configuration for your appli-
cation, contact your local distributor or sales representative before you
make any changes.
3.3 Jumper Location
The ARK-7480 Embedded Box Computer has a number of jumpers inside
the chassis that allow you to configure your system to suit your application.
The table below lists the functions of the various jumpers.
Figure 3.1: Jumper Location of internal SBC board of ARK-7480
Table 3.1: Jumpers
Jumper No Function
JP1 COM1~ COM6 Ring / Voltage Setting
JP3 Clear CMOS
JP4 LVDS/LCD Power Setting
JP5 COM2 RS-232/422/485 Setting
JP4
JP1
JP5
JP3