Filter
Top Products
FPM-3150 Series User Manual 28
Option
This panel function supports two modes—Operation Mode and Beep
Sound Mode—which allow configuration for specific touch screen appli-
cations, such as point-of-sales (POS) terminals.
NOTE: 1. If you used a single VGA output for multiple
monitors, please do not use the Multiple Monitors
function. Just follow the regular procedure for
calibration on each of your desktop monitors.
2. The Rotating function is disabled if you use the
Multiple Monitors function.
3. If you change the resolution of display or
screen address, you have to redo Map Touch
Screens so the system understands where the
displays are.
Operation
Mode
This mode enables and disables the mouse’s ability to
drag on-screen icons—useful for configuring POS termi-
nals.
Stream Mode – Select this mode and the mouse func-
tions as normal and allows dragging of icons.
Point Mode – Select this mode and the mouse only pro-
vides a click function, and dragging is disabled.
Beep
Sound
Mode
Enable Beep Sound – turns beep function on and off
Beep on Pen Down – beep occurs when pen comes
down
Beep on Pen Up – beep occurs when pen is lifted up
Beep on both of Pen Down/Up – beep occurs on both
Beep Frequency – modifies sound frequency
Beep Duration – modifies sound duration