Filter
Top Products
5 Chapter 1
1.2.8 Cleaning and Disinfecting
During normal use, MDPC-4090 may become soiled and should, there-
fore, be cleaned regularly. Agents: Green tinctured soap and enzymatic
detergents
Steps:
1. Wipe MDPC-4090 with a clean cloth that has been moistened in the
cleaning solution.
2. Prepare agent per manufacturer’s instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth
Cautions Do not immerse or rinse the MDPC-4090 and its
peripherals. If you accidentally spill liquid on the
device, disconnect the unit from the power source.
Contact your Biomed regarding the continued safety of
the unit before placing it back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol. Do not
autoclave or clean the MDPC-4090 or its peripherals
with strong aromatic, chlorinated, ketone, ether, or
Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.