Filter
Top Products
PPC-V106 User Manual 10
2.2 Installation Procedures
2.2.1 Connecting the Power Cord
There are two kinds of power supplies for the PPC-V106 series, AC and
DC.
For AC model :
The Panel PC can only be powered by an AC electrical outlet (100 ~ 250
volts, 50 ~ 60 Hz). Be sure to always handle the power cords by holding
plug ends only. Follow these procedures in order:
1. Connect the female end of the power cord to the AC inlet of the
panel PC.
2. Connect the 3-pin male plug of the power cord to an electrical out-
let.
For DC model :
Connect the 2 pin waterproof power cord to the DC inlet of the panel PC.
2.2.2 Connecting the Keyboard or Mouse
Before you start the computer, please connect the necessary mouse or
keyboard to the PS/2 mouse, keyboard port or serial ports.
2.2.3 Switching On the Power
When you look at the bottom of the panel PC, you will see the power
switch.