Filter
Top Products
37 Chapter 7
7.2.1 Installation for Windows 98/ME
1. If the Operating System's New Hardware Wizard prompts you with
"New Hardware Found" for the "PCI Ethernet Controller", you
should click "Next" until "Finish" is clicked, without specifying
location of the driver. You will see "PCI Ethernet Controller" in the
Device Manager.
2. You can then install or update the NDIS driver with the "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you with steps to install or
upgrade the driver.
b) setup -s: The InstallShield will complete the installation or upgrade
without prompting you for any instructions.
You need to reboot the system immediately after the Install shield
completes the installation/upgrade.
3. Do not click "Cancel" during New Hardware Wizard searches for
the driver.
4. 4. You can remove RTLSetup utility from Add/Remove Program
Palette in Control Panel, the InstallShield will prompt you the steps
to remove the driver. After remove the driver, please restart the
system immediately.
7.2.2 Installation for Windows 2000/XP
After finishing the Windows 2000/XP installation, the system will auto-
matically detect the Ethernet hardware and install the Ethernet driver
from the drivers database from Windows 2000, Windows XP when the
system reboots.
It is recommended that you upgrade to the Intel driver provided with the
CD. To upgrade to this driver, use this path : D:\PPC-V106\Lan\setup.exe