Filter
Top Products
6
is ready.
2.2 Installing
The hub does not require install device driver. Users can immediately use any of
the features of this product simply by attaching the cables and connecting the
power, then turn on the switch.
2.2.1 Desktop Installation
To locate the switching hub on the desktop and place the hub on a clean, flat desk or
table close to a power outlet. Plug in all network connections and the power cable,
then the system is ready
2.2.2 Installing Network Cables
After placing the hub on the desktop, then we need to know how to connect the
device to network.
2.2.2.1 Station Connections with Twisted-Pair Cable
Connect each station to the hub by a twisted-pair straight cable(10Base-T or
100Base-T cables). Plug one RJ-45 connector into a front-panel port of the hub,
and plug the other RJ-45 connector into the station’s network adapter.
2.2.2.2 Switch to Switch Connections with Twisted-Pair Cable
In making a switch to switch connection, you can use any port to connect
Another switch with any cable.
3.
Switch Operation
3.1 MAC Address Table and Learning