Advantek Networks ANS-2402G Switch User Manual


 
8
Keep Ethernet cables away from sources of electrical noise such as radios,
transmitters, broadband amplifiers, power lines and fluorescent lighting fixtures.
Water or moisture can not enter the unit
Air flow around the unit and through the vents in the side of the case is not
restricted
Never stack units more than eight high if freestanding
Do not place objects on top of any unit of stack
Do not obstruct any vents at the sides of the cases
4. Product Specifications
Standard IEEE802.3, 10BASE-T
IEEE802.3u, 100BASE-TX
IEEE802.3ab, 1000BASE-T
Interface RJ-45 x 26 Nway switching ports
Supports Auto MDIX
Cable Connections RJ-45 (10BASE-T) :
UTP Category 3, 4, 5
RJ-45 (100BASE-TX) :
UTP Category 5
RJ-45 (1000BASE-T)
UTP Category 5, 6
Network Data Rate Auto-negotiation (10Mbps, 100Mbps,
1000Mbps)
Transmission Mode Auto-negotiation
(Full-duplex, Half-duplex)
LED indications Power x 1, BK x 1
Port x 24, Link / Activity, 100M