Filter
Top Products
15
This program can be downloaded from the web site. http://tftpd32.jounin.net/
.You don’t need
to install this program. To run TFTPD32 just launch the executable file tftpd32.exe. The
configuration procedure for DHCP/BootP server is illustrated as the following figures.
Step1:
Click the “Settings” item and set base Directory.
Step2: To update the firmware through this program, you should select TFTP
server, DHCP server and Syslog server.
Step3: Click the “DHCP Server” item and setup items shown below. After
finishing the settings, click “SAVE” item to save the configuration.