Filter
Top Products
14
LK1800 User Manual Rev. 1
o [ShiftLevel*] Multi-shift-level function key definition for different shift
levels (* is from 1 to 9). To define a Multi-shift-level function key, click
on the
icon and enter the level number.
• Decimal equivalent numeric values for ASCII codes (only 1 to 240
allowed) can be entered directly by clicking on the
icon on the tool
bar or Key Edit→Enter ASCII Code on the menu bar. After code entry,
the ASCII code will be shown as a normal character or as blocks if the
code is a non-displayable character. To view the decimal value, click on
the
icon on the tool bar or Key Edit→Switch ASCII Display mode
on the menu bar. The decimal value will be shown as [xxx].
• Special Function keys and scan codes can also be entered in ASCII code
mode by entering the token names of the keys as a character string. For
example, to define a key to press and release <a>, enter the string
“[A][0F0][A]”. However, ASCII code and Scan code should NOT be mixed
together in one key.
o Each key is entered as a character string enclosed between square
brackets, [ ]. For example, [Ctrl], [Alt], [Enter], [A], [B], [1], [2], [=],
[PAD3], [ESC] etc.
o Full List of all token names of the keys can be found at end of this
menu or click on Help→Key Word List
o Token names are case sensitive.
5. Special Features
A. Multi-Shift-Level Function
• A single key can be programmed to output different codes when combined
with the Multi-Shift-Level function keys.
• To program multiple definitions into a single key, enter the different definitions
separated by the [Separator]. The [Separator] can be inserted by clicking on
the
icon on the tool bar or Key Edit→Enter Level Separator on the
menu bar. It will be shown in the definition content as [Separator].
• The definition content before the first [Separator] corresponds to the normal
key output. The first definition content after the first [Separator] will be the
Shift Level 1 output. Definition after second [Separator] will be the Shift Level
2 output, and so on up to ShiftLevel 9.
• Certain designated keys will be programmed as Multi-Shift -Level function
keys for activating multiple definition output of the multi-definition key. Multi-
Shift-Level function keys can only be programmed under ASCII Code mode.
To program a key as Multi-Shift-Level function key, click on the
icon on
the tool bar or Key Edit→Enter Shift Level code. The definition will be
shown as [ShiftLevel1] to [ShiftLevel9] corresponding to the Shift Level
selected.
• After the keyboard is programmed, holding down [ShiftLevel1] key and then
press the multi-definition key will send out Level 1 definition. Holding down