Agilent Technologies 664xA Power Supply User Manual


 
Language Dictionary 33
*TRG
Meaning and Type
Trigger Device Trigger
Description
This command generates a trigger when the trigger subsystem has BUS selected as its source. The command has the same
affect as the Group Execute Trigger (<GET>) command.
Command Syntax *TRG
Parameters (None)
Query Syntax (None)
Related Commands ABOR CURR:TRIG INIT TRIG[:IMM] VOLT:TRIG
<GET>
*TST?
Meaning and Type
Test Device Test
Description
This query causes the power supply to do a self-test and report any errors (see "Selftest Error Messages" in "Chapter 3 -
Turn-On Checkout" of the power supply Operating Guide).
Query Syntax *TST?
Returned Parameters <NR1>
0 Indicates power supply passed self-test.
Nonzero Indicates an error code.
Related Commands (None)
*WAI
Meaning and Type
Wait to Continue Device Status
Description
This command instructs the power supply not to process any further commands until all pending operations are completed.
"Pending operations" are as defined under the *OPC command. *WAI can be aborted only by sending the power supply a
GPIB DCL (Device Clear) command.
Command Syntax *WAI
Parameters (None)
Query Syntax (None)
Related Commands *OPC *OPC?