Filter
Top Products
13
Here is a checklist of items to consider when upgrading systems:
1. Which 8510 do I have? The 8510C is recommended for the latest available
measurement capabilities.
• To upgrade an 8510A to an 8510C, order 85103E.
• To upgrade an 8510B to an 8510C, order 85103F.
• Make sure the appropriate options are ordered. For instance, order
Option 010 if the 8510 has previously installed time domain.
• Do I need pulse capabilities? If yes, order 85111B for 8510C.
2. What test set do I need?
• Refer to Table 3 for test set selection. Frequency range and application
type are critical when selecting the appropriate test set.
3. What source do I need?
• Refer to Table 3 for the source(s) that’s required for the test set of choice.
4. What measurement accessories do I need?
• The appropriate measurement accessories will be determined mainly
by the connector type of the device-under-test (DUT). These accessories
include calibration (mechanical or electronic), verification kits, test port
cables and/or adapters as appropriate. Refer to pages 17 through 19 for
available products.
System upgrades
Upgrades available for existing 8510 systems to 8510XF single-sweep systems
8510C
Millimeter
subsystem
83651B
83621B
Upgrades
from ...
85107B
85109C
85106C
85106C w/ Opt.002
85106D
85106C w/ Opt.001 & 002
85106D w/ Opt.001
85109C w/ Opt.002
... to 85 GHz E7345A
E7346A
E7347A
... to 110 GHz E7355A
E7356A
E7357A
Customer
owned
equipment