Filter
Top Products
55
2 Install 89600 VSA
Software
The 89600 VSA software must be installed on a computer.
Installation for standard operation
Insert the Agilent Technologies 89600 Series Software CD-ROM in your standard PC
and follow the instructions in the installation wizard. When the Installation Manager
window opens, click Install 89600 Series Software. In the Hardware Support window,
select Acqiris VSA Server. This will avoid installing unnecessary components on your
computer. After the software and hardware support is installed, exit the Installation
Manager window.
Installation for embedded operation
Operation of the 89600 Series software on an embedded Compact PCI computer is
similar to operation on a standard PC. The instructions for standard operation can be
followed here as well using a LAN or USB accessible CD drive.
Note: Before you can run the VSA with an Agilent Acqiris digitizer, make sure
the Agilent Acqiris digitizer hardware and driver software are installed and
configured as directed in the 89600 Series Installation and VXI Service Guide
found on your Agilent Technologies 89600 Series Software CD or go to
www.agilent.com/find/89600 then click on Technical Support > Manuals.