Filter
Top Products
6
3 Hardware
Confi guration
Connect the digitizer to the computer as shown in Figure 1a or 1b. There are two options
for the connection, by remote computer or by embedded computer.
3.1 I/O between computer and digitizer
Operation of the 89600 Series software on an embedded Compact PCI computer
is similar to operation on a standard PC. The instructions for standard operation
can be followed here as well using a LAN or USB accessible CD drive.
The digitizers can be connected through various interface types from a
CompactPCI crate to either a desktop PC or a portable PC.
Alternatively, the digitizers can be controlled by an embedded computer as
shown in Figure 1b.
Figure 1a. Digitizers connected through CompactPCI to PCI interface
Figure 1b. Digitizers connected through embedded single board PC
Agilent Acqiris data acquisition system
Interface
Optional anti-alias LPFs
Input Ch 1
(Digitizer Ch 1)
Input Ch 2
(Digitizer Ch 2)
Agilent Acqiris digitizer
1 234
Agilent Acqiris data acquisition system
Embedded computer
Optional anti-alias LPFs
Input Ch 1
(Digitizer Ch 1)
Input Ch 2
(Digitizer Ch 2)
Agilent Acqiris digitizer
1 234