Filter
Top Products
24-Port 10/100Mbps Ethernet Switch User Guide
10 AirLink+
anytime later without needing to change the Switch or
reconfigure the network.
The Switch combine dynamic memory allocation with store-
and-forward switching to ensure that the buffer is
effectively allocated for each port, while controlling the data
flow between the transmit and receive nodes to guarantee
against all possible packet loss.
The Switch is an unmanaged 10/100 Fast Ethernet Switch
that offers solutions in accelerating small Ethernet
workgroup bandwidth. Other key features are:
• 24-port 10/100Mbps Ethernet Switch with RJ-45
connectors
• Support auto-negotiation for speed and duplex modes
for each port
• Supports auto-MDI/MDI-X for each port
• Wire speed reception and transmission
• Store-and-Forward switching method
• Integrated address look-up engine, supports 8K
absolute MAC addresses
• Supports 2.5-Mbits RAM for data buffering
• Front-panel diagnostic LEDs
• IEEE 802.3x flow control for full-duplex
• Back pressure flow control for half-duplex
• Standard 19" Rack-mountable size
Unpacking & Installation
This chapter provides unpacking and setup information for
the Switch.