Airlink Version 2.40 Network Card User Manual


  Open as PDF
of 7
 
September 2006 3
Raven-E iDEN for TELUS - Quick Start, version 2.40
a. Slide the Raven-E back into the case.
b. Secure the back of the Raven-E with the screws.
Your AirLink Raven-E should be mounted in a position that allows easy access for the cables so
they are not bent or constricted. The LEDs on the front panel should be visible for ease of opera
-
4.
Finishing the SIM installation
Modem Master Reset
The final step is issuing a master reset for the Raven-E. You will need to connect to theRaven-E
using a terminal application such as HyperTerminal and connect directly to theRaven-E from your
computer.
1. Connect your modem to your computer using an Ethernet cable.
2. Connect theRaven-E to power.
3. Using a terminal application, connect to the Raven-E.
FIGURE 6. Terminal connection
Enter the Master Reset Command
1. Type AT*PROVISION=000000, 0123456789
2. The Raven-E should respond with: "Master Reset Succeeded". With any other response, con-
tact TELUS to check the account status.
3. Press the reset button on the Raven-E.
FIGURE 7. Reset button
TheRaven-E should now register on the network.
Hardware Installation
 previous next