Filter
Top Products
Section 2
Verify Connection to Router
Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and
click OK. You will see the command prompt as below.
Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back.
Step 3 If you get Request timed out, or Destination host unreachable, double-check the network
cable connection between the computer and the router and try Step 2 again. If you still encounter
problem, go to the next step; otherwise proceed to Section 3, Configuring the Router.
For Windows 2000/XP
Step 4 At the command prompt, type ipconfig/release and press Enter.