Filter
Top Products
53
Reset You can also click “Reset”‟ button to unselect all DMZ entries.
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures,
or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30
seconds while router is rebooting).
3.3.4 ALG Settings
Application Layer Gateway (ALG) is a special function of this router. It includes many preset
routing rules for numerous applications which require special support. With these supports,
those applications which required special support will be able to work with NAT architecture.
There are many applications listed here. Please check the box of the special support for
applications you need.
After you finish with all settings, please click “Apply” button.