Filter
Top Products
16
2) “Connect on Demand” - only connects to Internet when there’s
a connect attempt.
3) ‘Manual’ - only connects to Internet when ‘Connect’ button on
this page is pressed, and disconnects when ‘Disconnect button
is pressed.
Idle Time Out Specify the time to shutdown internet connect after no internet
activity is detected by minute. This option is only available when
connection type is ‘Connect on Demand’.
Option 2: Dynamic IP Settings
Click on Cable Modem for your WAN type.
When the Dynamic IP settings come up, leave the settings as default and click NEXT.
Fixed IP
Click on Fixed-IP xDSL if your ISP (Internet Service Provider) has provided you a set of IP
addresses for your Internet connection.
Enter the IP address, Subnet Mask and Default Gateway provided by your ISP.
Note: You must use the addresses provided by your Internet service provider, wrong setting
value will cause connection problem.