Filter
Top Products
18
PPTP Gateway Please input the IP address of PPTP gateway assigned by your
Internet service provider here.
Connection ID Please input the connection ID here, this is optional and
you can leave it blank.
MTU Please input the MTU value of your network connection here. If
you don’t know, you can use default value.
BEZEQ-ISRAEL Setting item BEZEQ-ISRAEL is only required to check if you’re
using the service provided by BEZEQ network in Israel.
Connection Type Please select the connection type of Internet connection you
wish to use, please refer to last section for detailed descriptions.
Idle Time Out Please input the idle time out of Internet connection you wish to
use, and refer to last section for detailed descriptions.
When you finish with all settings, please click NEXT.
L2TP
L2TP is another connection method for xDSL and other Internet connection types, and all
required setting items are the same with PPTP connection. Like PPTP, there are two kinds of
required setting, we will start from “WAN Interface Settings”:
Select the type of how you obtain IP address from your service provider here. You can choose
“Obtain an IP address automatically” (equal to DHCP, please refer to „Cable Modem section
above), or “Use the following IP address” (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of L2TP settings are correct. Please contact your Internet service provider if you don’t
know what you should fill in these fields.
Now please go to L2TP settings section: