Filter
Top Products
50
Parameter Description
Enable Port Triggering Check to enable Port Triggering, or uncheck to disable.
IP Address This is the private IP of the computer/server behind the NAT
firewall. Note: You need to give your PC a fixed/static IP
address for Port Triggering to work properly.
Computer Name This is the computer that you need to enable the port triggering
function. Select a PC from here if you do not know its IP
address and click on the << button to add the IP address to the
left blank. If you do not see any computer after you click on the
drop-down menu, select the option “Refresh” and you will be
given a list of computers that are connected to your network.
TCP/UDP Port to Open
This is the TCP/UDP ports you want to trigger. Type in a range
of TCP/UDP ports to be triggered. For instance, “5000-5300” or
“9091, 9093-9100”, depending on your special application’s
requirement.
Comment The description of this setting.
Popular Application This list includes many popular applications you may be using.
Select the application you want to use and click on the Add
button next to it; you will see the proper port numbers added to
the “TCP/UDP Port to Open” blank.
Add (in red box)
Click on Add button in the red box to save the trigger rule you
set into the Trigger-Port Table.
Current Trigger-Port Table From the table, you can select each Port triggering setting by
checking the “Select” checkbox.