Filter
Top Products
23
After 30 seconds, you will go back to the Status page with valid IP address assigned by you ISP
(or configured by yourself if you use Static IP) in either WAN or 3G/3.5G Status section. If either
section has valid IP addresses assigned, the router is connected to the Internet.
Congratulations! Your router configuration has been finished. You should now be able to
access the Internet; if not, please go to section 2.4 for troubleshooting.
2.3 Connecting to the Router Wirelessly
You must configure your wireless computer in order to establish a wireless connection to the
router. In this section, you can find the instructions of how to connect to the router wirelessly
with your Vista computer. You can also refer to the manual of your wireless network card
regarding how to connect to a router wirelessly.
Step 1 Click on this icon
on the task bar of your desktop, then click on Wireless networks
are available.
Step 2 Select the wireless network you want to connect to and click Connect.