17
Configuring WPA Encryption
If your existing wireless network has WPA encryption enabled, you need to configure the
wireless adapter with the identical encryption settings in order to establish a connection.
Step 1 Go to the Properties screen of the preferred WLAN as described above and verify
that the Wireless network name is the SSID of the Access Point you’re trying to connect to.
Step 2 Choose WPA-PSK from the Authentication Mode. Select TKIP as the Data
Encryption and click on the Authentication Config button.
Step 3 Enter a passphare in the WPA Passphrase field and click OK. (Note: the
passphrase must be between 8 – 63 characters long).