Filter
Top Products
11
4. Configure Wireless Monitor
This section describes the various functions of the Wireless Monitor that you can
configure. Some general functions of this utility will be described here, and the
features of each tab will be described in the following sections.
Top Menu: Click on the buttons to go to the specific settings/information you need to
change/view.
RF ON/OFF: Click on RF ON/OFF to switch on/off the wireless connection.
Click on the down/up arrow on the right hand side to display or hide the Status.
Status: Display the SSID and BSSID of connected wireless access point or wireless
device (displayed as SSID<-> BSSID as shown in above picture. If there’s no active
connection currently, ‘Disconnected’ will be displayed here.