Filter
Top Products
17
4.3 Advanced
This wireless network card provides several advanced settings for experienced
wireless users. You can change these settings to increase data transfer performance,
or change operation mode.
Wireless mode: Select wireless mode, only 2.4G (single bandwidth) is available here.
Enable TX Burst: Check this box to accelerate the data transmit rate. It may not work
with all wireless access points and wireless devices.
Enable TCP Window Size: Check this box and the configuration utility will adjust TCP
window size automatically to get better performance. It should be safe for most of
wireless environments, but if you found some problem on data transfer, uncheck this
box.
Fast Roaming at: Check this box and you can adjust the threshold of when this
wireless network card should switch to another wireless access point with better signal
quality. Only adjust value when you know what result it will cause.
Select Your Country / Region Code: Select the country / region code of the place
you’re living. Different country / region has different regulations on wireless devices,
and it’s forbidden to use certain channel (radio frequency) in some countries or
regions. For instance, only channel 1~11 are allowed in US and Canada. Please
select the country and region code according to the place you live. (This option may
be disabled for certain countries due to emission safety regulations.)
Click Apply to save the new settings.