Filter
Top Products
If you are using Pin Code method, enter the Pin Code in the Pin Number box and
click connect. If you are using Push Button method, click on Virtual Push Button
or the physical push button on the router.
After a few moments both the router configuration screen and the adapter configura-
tion screen should show a message telling you that you are connected.
Step 5 Click Finish on the adapter screen.
Step 6 Click Continue on the router configuration screen.
Troubleshooting:
If you are experiencing problems with the connection (unable to connect, low
signal strength, slow connection speed, not working, unstable wireless connec-
tion) you will want to tune your router’s signal by changing channels on the
router.
You do not need to change the channel on the card; it will automatically pick up the
new channel after you reboot. The only channel that you need to change is the
channel of the router.
Your router has 11 different channels to choose from. Start with channel 1 and work
your way up. Each time you change the channel on the router, make sure that you
restart the wireless computer before trying to connect again. Keep going through
the channels until you find one that gives you a stable connection.
For instructions on changing channels, refer to the documentation that came with
your router.
Technical Support
E-mail: support@airlink101.com
Toll Free: 1-888-746-3238
Web Site: www.airlink101.com
*Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 1.0. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix
of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual
data throughput rate. Specifications are subject to change without notice. All products and trademarks are the property of their respective
owners. Copyright ©2007 AirLink101®
Section 4