Filter
Top Products
Configuring High Availability VLANs
page 3-18 Release 5.1.6.R02 User Guide Supplement June 2005
-> vlan 2 port default 1/1-3 5/4
4 Configure VLAN 5, which will become an HA VLAN, on both Switch 1 and Switch 2 with the vlan
command as shown below:
-> vlan 5
5 Assign the ingress ports 2/5, 2/6, and 2/7 to VLAN 5 on Switch 1 with the vlan port-mac ingress-port
command as shown below:
-> vlan 5 port-mac ingress-port 2/5-7
6 Assign the egress ports 4/10, 4/11, and 4/12 to VLAN 5 on Switch 1 with the vlan port-mac egress-
port command as shown below:
-> vlan 5 port-mac egress-port 4/10-12
7 Tag port 3/7 on Switch 1 with VLAN 5 using the vlan 802.1q command as shown below:
-> vlan 5 802.1q 3/7
8 Assign the egress ports 1/1, 1/2, and 1/3 to VLAN 5 on Switch 2 with the vlan port-mac egress-port
command as shown below:
-> vlan 5 port-mac egress-port 1/1-3
9 Tag port 5/4 on Switch 2 with VLAN 5 using the vlan 802.1q command as shown below:
-> vlan 5 802.1q 5/4
10 Assign the HA VLAN destination MAC address to VLAN 5 on both Switch 1 and Switch 2 using the
mac-address-table port-mac vlan mac command as shown below:
-> mac-address-table port-mac vlan 10 mac 00:da:52:71:02:35
11 Set the HA VLAN ingress flood queue bandwidth size to 100 Mbps using the vlan port-mac band-
width command as shown below:
-> vlan 5 port-mac bandwidth 100