Alcatel-Lucent 6850-24 Switch User Manual


 
26 Using WebView June 2007
The switch can be configured and monitored using WebView,
Alcatel-Lucent’s Web-based device management tool.
WebView software is pre-installed in the switch; you are not
required to load additional software.
Note. Although WebView software is pre-installed, you
must first enable HTTP sessions for your switch before
you can log in. Refer to “Unlocking Session Types” on
page 16 for more information.
Browser Compatibility
The following Web browsers are recommended for use with
WebView:
Internet Explorer 6.0 and later for Windows NT, 2000,
XP, 2003
Netscape 7.1 for Windows NT, 2000, XP
Netscape 7.0 for Solaris SunOS 5.8
Logging In to WebView
Note. Before attempting to establish a WebView session,
be sure that you have first unlocked the HTTP session
type via the aaa authentication command. Otherwise, a
login error will occur. See “Unlocking Session Types” on
page 16 for more information.
To access WebView and log in to a switch:
1 Open any Alcatel-Lucent-tested Web browser.
Using WebView