Filter
Top Products
Removing the Bluetooth Card | 67
Removing the Bluetooth Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
If you ordered a card with Bluetooth wireless technology with your computer, it is already
installed.
Prerequsites
1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the compartment door. See "Removing the Compartment Door" on page 14.
3 Remove the center control cover. See "Removing the Center Control Cover" on
page 41.
4 Remove the keyboard. See "Removing the Keyboard" on page 45.
5 Remove the power button board. See "Removing the Power Button Board" on
page 55.
6 Remove the display assembly. See "Removing the Display Assembly" on page 57.
7 Remove the status light board. See "Removing the Status Light Board" on page 61.
8 Remove the palm rest assembly. See "Removing the Palm Rest Assembly" on
page 64.
Procedure
1 Disconnect the Bluetooth-card cable from the connector on the system board.
2 Remove the screw that secures the Bluetooth card to the system board.
3 Lift the Bluetooth card away from the system board.
39