Filter
Top Products
SMs with RJ45 connectors Connect System Cables
1-29
Telesyn 9100 Installation Guide (Installation of Allied Telesyn 9100)
1.13.2 SMs with RJ45 connectors
Attach the RJ45 end of the Ethernet cable to the specified port on the FE10 card.
FIGURE 1-18
FE10 Cable Connector
Note: Each RJ45 cable connected to the FE10 card should be dressed neatly and tightly. Do
not permit cables to loop.
FIGURE 1-19
FE10 RJ45 Connector Dressing
1.13.3 SMs with Optical connectors
To Be Supplied
1.13.4 GE4/FE2
Note: The 9100 is equipped with 2 FE ports and 4 GE ports. The first FE or GE port can be used as
the system uplink port. The other FE port or GE ports are used to support daisy-chaining. See
the Allied Telesyn User Guide for more information.
1.
Install the SFPs and attach the optical cable to the GE4 or connect the cable to the FE2 card.
2.
Attach the other end of the cable to the uplink device.