Filter
Top Products
Page 5 | AlliedWare Plus™ OS: Overview of QoS
Outline of the QoS processing flow
Let's look at each QoS process in the order that they are applied to a packet. The following
figure gives a quick view of the QoS features we are about to discuss.
Initial mapping to an egress queue, based on 802.
1
p
value
Immediately after ingress, a VLAN-tagged Ethernet frame can be assigned to the appropriate
egress queue on the basis of the value of its VLAN Tag User Priority. This means that
incoming frames that already carry meaningful priority information can be forwarded on the
basis of that information. The mapping of the User Priority value to an egress queue is
configurable, so the administrator can decide, for example, to send frames with a Priority
value of 7 to queue 3 and frames with a Priority of 2 to queue 7.
Untagged frames don't have a VLAN Tag User Priority, so these frames can be assigned to a
default queue of the administrator's choice.
The net effect of this process is to set a value on the Egress Queue marker that the packet is
carrying.
Ingress port
Premarking
Remarking
Limiting (dropping non-conformant)
Queue shaping
Classification using ACLs
Packet
Egress
Queue emptying and egress
Tagged: priority mapped to queue
Untagged: mapped to default queue
Ingress
Policing
QoS4.eps