Filter
Top Products
8 Patch Release Note
Patch 86222-14 for Software Release 2.2.2
C613-10319-00 REV N
When an M2 version of the AR020 PRI E1/T1 PIC was installed in a AR040
NSM it was not possible to select the T1 mode of operation regardless of the
jumper setting. This issue has been resolved.
A fatal error occurred when the firewall discarded disallowed multicast
packets. This issue has been resolved.
Features in 86222-08
Patch file details for Patch 86222-08 are listed in Table 7.
Patch 86222-08 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
Tunnel creation failed when attempting to establish a point-to-point tunnel
from an ATR router (tunnel originator) to another vendor’s router. This
issue has been resolved.
When IGMP snooping was enabled, if a member left a group on a port, it
could not re-join the group on that port. This issue has been resolved.
Substantial changes have been made to PIM in more recent code releases.
These have been retrofitted to 2-2-2 in the patch. Note: these changes have
incorporated PCRs 01159 and 01190.
The PPPoE access concentrator did not stop RADIUS accounting when a
PADT termination was received without receiving a proper PPP
termination first. This issue has been resolved.
The dot1dBridge MIB implementation now complies with RFC1493.
PCR: 01254 Module: PRI Network affecting: No
PCR: 01256 Module: Firewall Network affecting: No
Table 7: Patch file details for Patch 86222-08.
Base Software Release File
86s-222.rez
Patch Release Date
09-Nov-2001
Compressed Patch File Name
86222-08.paz
Compressed Patch File Size
291012 bytes
PCR: 01201 Module: L2TP Network affecting: Yes
PCR: 01233 Module: PIM Network affecting: No
PCR: 01236 Module: PPP Network affecting: No
PCR: 01237 Module: SWI Network affecting: No