Filter
Top Products
Patch 86222-14 For Rapier Switches and AR800 Series Modular Switching Routers 9
Patch 86222-14 for Software Release 2.2.2
C613-10319-00 REV N
Features in 86222-07
Patch file details for Patch 86222-07 are listed in Table 8:
Table 8: Patch file details for Patch 86222-07
Patch 86222-07 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
DHCP now correctly handles request messages containing request list
options not supported by the router.
The router would accept TCP sessions with destination address the same as
the subnet broadcast address for one of the router’s interfaces. Firewall-
generated packets destined for a subnet broadcast address on one of the
routers interfaces would cause a fatal error. These issues have been
resolved.
A watchdog timout occurred when the router received an HTTP message
with an over-length header. Normal HTTP requests would also occasionally
cause watchdog timeouts. These issues have been resolved.
The OSPF route filter was not filtering out external routes. This issue has
been resolved.
MD5 Authentication now works correctly with RIP packets.
The SET IP LOCAL command caused a fatal error if the router was
configured with a default route over an L2TP tunnel, because there was no
valid route to the remote IP address of the tunnel. This issue has been
resolved.
Debug messages are no longer generated when a Q.931 Advise of Charge
Notification message is received.
Base Software Release File
86s-222.rez
Patch Release Date
26-Oct-2001
Compressed Patch File Name
86222-07.paz
Compressed Patch File Size
250468 bytes
PCR: 01018 Module: DHCP Network affecting: No
PCR: 01160 Module: IPG,FIREWALL Network affecting: No
PCR: 01168 Module: HTTP Network affecting: No
PCR: 01182 Module: OSPF Network affecting: No
PCR: 01193 Module: IPG Network affecting: No
PCR: 01194 Module: L2TP, IPG Network affecting: No
PCR: 01197 Module: Q931 Network affecting: No