Filter
Top Products
Installing the Driver Software for Windows
46
Updating the Driver Software for Windows
To update the driver software, use the same procedure for installing the
driver software for the first time. The only difference between updating and
installing the driver software is the name of your adapter that Device
Manager detects and lists.
Device Manager lists your adapter card as Allied Telesis AT-2701FxXv2
100Mb Fiber Ethernet once you installed the driver software. Before you
installed the driver software, Device Manager lists your adapter as
Ethernet Controller or a Realtek device. To obtain the latest driver
software from the Allied Telesis website, see “Downloading the Driver
Software for Windows” on page 35.
The procedures for installing the driver software are slightly different
among Windows operating systems. To install the driver software on your
system, follow one of the procedures below:
“Updating the Driver on Windows 7,” next
“Updating the Driver on Windows XP” on page 47
Updating the
Driver on
Windows 7
To update the driver software for your AT-2701 series adapter, perform
the following procedure:
1. Access the Device Manager. See “Accessing Device Manager on
Windows 7” on page 37.
2. In the Device Manager window, right-click Allied Telesis AT-
2701FxX(a) Fast Ethernet Adapter.
The shortcut menu appears as shown in Figure 28 on page 47.