Filter
Top Products
Modifying Advanced Properties
58
Overview
The AT-2701 series adapter allows you to modify advanced properties to
meet your requirements. To access the advanced properties, you must
access Device Manager, then go to each advanced property page.
Guidelines Here are the guidelines to modifying the advanced properties:
To change the advanced property settings, you must have
Administrator privileges.
When you upgrade the driver software, the settings of the
advanced properties may change. Verify the settings after
upgrading the driver software.
Supported
Advanced
Properties
The supported advanced properties depend upon the AT-2701 adapter
model and the operating system that the adapter is installed on. See
Table 3.
Table 3. Advanced Properties per Model
OS Model Advanced Properties
Windows 7 AT-2701FXa
“Early Tx Threshold” on page 62
“Network Address (LAA)” on page 63
“PCI PME” on page 65
“Speed/Duplex” on page 67
“Vlan Id” on page 70
“Wake on Magic Packet” on page 72
“Wake on Pattern Match” on page 74
AT-2701FTXa
“Early Tx Threshold” on page 62
“Network Address (LAA)” on page 63
“PCI PME” on page 65
“Speed/Duplex (100Mb Fiber)” on page 68
“Speed/Duplex (Copper)” on page 69
“Vlan Id” on page 70
“Wake on Magic Packet” on page 72
“Wake on Pattern Match” on page 74