Filter
Top Products
AT-2874SX Gigabit Ethernet Fiber ExpressCard Installation and User’s Guide
58
Log Status Messages
The Log Status Messages property allows you to select messages that the
driver generates.
To change the Log Status Messages, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 47.
2. Select Log Status Messages in the Property box.
The Log Status Messages page is displayed as shown in Figure 35.
Figure 35. Log Status Message Page
3. Select one of the following options:
None — The adapter does not generate any messages.
Errors — The adapter generates only error messages.
Warnings — The adapter generates only warning messages.
Status Messages— The adapter generates an event log entry
every time the link status changes. This is the default setting.
All Messages — The adapter generates all messages. This option
is for test purposes only.
4. Click OK.