Filter
Top Products
AT-S95 Version 2.0.0.25 Software Release Notes
PN 613-001555 Rev A 2 Allied Telesis, Inc.
What’s New in Version 2.0.0.25
Newly Introduced Feature
None
Resolved Issues
DNS: DNS behavior was previously inconsistent and is now corrected.
(CQ130199 ATI285)
IGMP ACL: IGMP ACL was not applied properly and this behavior is now corrected.
(CQ 123252 ATI256)
Known Issues
The following known issues are present in the current release of the resolved in AT-S95
software:
Default VLAN - Disabling the default VLAN is not allowed in this release, according to the
device specifications. As a part of backward compatibility support, upgrading a device which
has the default VLAN disabled on it to latest version will succeed. Relevant errors for
compatibility of configuration are displayed.
Compatibility - To allow proper support of backward and forward compatibility switching
between the old and new images using an existing configuration file (created on an older
version) should be done by 'reload'.
Port Mirroring - Target port that is configured to 802.1x Auto should not send EAP packets.
This is a minor issue as it does not undermine functionality or performance.
QoS: Egress Tagged Port send frames with default user priority 1 instead 0.
Stack: Master and backup are 24 ports non PoE, slave unit 3 is 48 ports. When reloading unit
2 the master reboots rarely.
DHCP Option 82: the device doesn’t recognize option 82 fields that refer to the device itself
(to the internal interface). Instead of getting an IP address, the device removes the option 82
field (which is actually correct) and then it transmits the traffic to the trusted ports.
MAC Support: Max 1K MAC Addresses can be configured as delete-on-timeout/reset.
Statistics: Received packets are not increased in the RMON statistics.
Security (port lock): Port security mechanism is not triggered for MAC violation if MAC is
learned on another locked port as a secured MAC address.
Mac authentication - MAC auth. fails if the default of the radius server is not md5.
Recommended User Work around: Use md5 as default of the radius server.