Filter
Top Products
AT-S95 Version 2.0.0.25 Software Release Notes
PN 613-001555 Rev A 7 Allied Telesis, Inc.
17. Click the Reset button.
The switch is rebooted.
Product Documentation
For hardware installation instructions for the AT-8000GS switches, refer to the following manual:
AT-8000GS Series Stackable Gigabit Ethernet Switches Installation Guide
For software management instructions, refer to the following manuals:
AT-S95 Management Software CLI User’s Guide
AT-S95 Management Software Web Browser Interface User’s Guide
These documents are available for on the Allied Telesis website at available at
www.alliedtelesis.com/support/software/. Once you access the web site, enter the hardware
product model in the Search by Product Name field; for example, enter “AT-8000GS/24.” Then
click Find. You can view the documents online or download them onto your local workstation or
server.
Where to Find Product Information and Management Software Updates
Both the product documentation and the management software updates for all Allied Telesis
products are available on our web site at http://www.alliedtelesis.com/support.
Once you access the web site, enter the hardware product model of your switch in the Search by
Product Name field, for example, enter “AT-8000GS/24.” Then click Find. You can view the
documents online or download them onto your local workstation or server.
The software is available for download at http://www.alliedtelesis.com/ support/software/
restricted/. You must have an account to access this site. If you do not have an account, then
click on the “create an account” link.
History of Previous Versions
History of Resolved Issues
Version 2.0.0.24
In some cases where more than one switch has the same STP Bridge Priority value in a
network, the switch with the higher MAC address would be elected as the STP root bridge.
This issue has been resolved.
After a switch is operation for a period of time, it may stop forwarding traffic on some ports
and does not provide link up/down indications for those ports. This issue has been resolved.
Issues Resolved Before Version 2.0.0.24
SNMP— Added support for SNMP trap when master stack unit is down (CQ 00114211 ATI
161).
udp-mib— The definition for udpHCGroup has been commented out (CQ 119274).