Filter
Top Products
Chapter 2: Installing the Switch
52
Unpacking the Switch
To unpack the switch, perform the following procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Make sure the following components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
One AT-9400 Gigabit Ethernet Switch
Two rack-mount brackets
Eight flathead Phillips rack-mount bracket screws
AC power cord (AC switches only; Americas, EU, Australia, and
UK only)
AC power cord retaining clip (AC switches only)
Management cable for local management
Documentation CD
Warranty card