Filter
Top Products
6 Network Service Module
C613-03022-00 REV K
Hardware Overview
This section provides an overview of the hardware features of NSMs. NSMs are
expansion options for switch and router models with an NSM bay. NSMs slot
into a base-unit switch or router and either directly provide additional WAN
interfaces, or provide expansion slots for Port Interface Cards (PICs).
Hardware descriptions for your switch or router, Uplink Modules, and PICs
can be found in their respective Hardware References. These documents can be
downloaded from www.alliedtelesis.com/support/software.
Safety and conformance information can be found in the Installation and Safety
Guide or Safety and Statutory Information booklet for your switch or router,
which can be downloaded from www.alliedtelesis.com/support/software.
Common Features
The following hardware features are common to all NSM models.
Environmental
conditions
■ Operating temperature range: 0 ºC to 40 ºC (32 ºF to 104 ºF)
■ Storage temperature range: -25 ºC to 70 ºC (-13 ºF to 158 ºF)
■ Relative humidity range: 5 to 95% non-condensing
Regulatory
Standards
AT-AR040
■ Listing: UL, cUL, TUV
■ Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1-03, EN60950-1,
AS/NZS60950.1
■ EMC: Radiated: EN55022 class A, FCC class A, VCCI class A,
AS/NZS CISPR22 class A
■ Immunity: EN55024
AT-AR041 and AT-AR042
■ Listing: TUV
■ Safety: EN60950-1, AS/NZS60950.1
■ EMC: Radiated: EN55022 class A, AS/NZS CISPR22 class A
■ Immunity: EN55024
■ Network interface: TBR3, ACA TS031, iDA ISDN 1
AT-AR048
■ Listing UL, cUL
■ Safety: UL60950-1, CAN/CSA-C22.2 No. 60950-1-03
■ EMC: Radiated: FCC Part 15 class A, IC-03 class A
■ Network interface: ANSI T1.102, ANSI T1.404, ANSI T1.107, ANSI T1.231