Allied Telesis AT-FAN01 Power Supply User Manual


 
Installation Guide
5
Package Contents
Depending on the model, switches are shipped with a single supply unit (PSU),
either AC or DC. Some models also have fan-only modules (FOM), chassis fan
modules, or blanking plates.
The AT-8948, AT-9924Ts, x900-24XT, x900-24XT-N, and x900-24XS
switches have a PSU and a FOM installed.
The x900-48FE, x900-48FS, AT-9924T, and AT-9924SP switches have a PSU
and a blanking plate installed.
The SwitchBlade
®
x908 is shipped with dual chassis fan modules and
blanking plates, but no PSUs.
The following items are included with each factory-installed PSU. Contact your
authorised Allied Telesis distributor or reseller if any are damaged or missing.
one AC power cord (AC models)
one power cord retaining clip (AC models)
one warranty card
The following items are included with PSUs when purchased separately:
one AC power cord (AC models)
one power cord retaining clip (PWR01 and PWR02 AC models only)
one clip-on ferrite core (PWR05 only)
this Installation Guide
one warranty card
The following items are included with fans when purchased separately:
this Installation Guide
one warranty card