Filter
Top Products
Installation and Safety Guide
17
Caution As a security precaution, change the password as soon as possible.
Remember the new password, as there is no way to retrieve it if it is lost.
To change the password, select Management > Users from the sidebar
menu. Select the Manager account and click Modify.
5. Customise the router for your region.
Change the default ISDN territory to your region. Select Diagnostics Page >
Command Line, and enter this command:
set system territory={australia|china|europe|japan
|korea|newzealand|usa}
We recommend you set the territory even if you are not installing an ISDN
PIC now.
In Australia only:
• To use the Micro service, set the territory to australia.
• To use the OnRamp service, set the territory to europe.
6. Change the default IP address.
Change the default IP address to match the addressing system on your LAN.
Select Quick Start > LAN.
Caution Do not leave the management port IP address set to its default
because this may constitute a serious security risk.
7. To access context-sensitive help in the GUI:
Click on the Help button [Help]. The Help button is located at the top of
the sidebar menu or on any popup page.