Filter
Top Products
Chapter 21: Security
272
authentication.
Enabled: The Piggyback Mode is Enabled.
Disabled: The Piggyback Mode is Disabled.
VLAN Assignment - This parameter enables the VLAN
assignment that you select with the Guest VLAN ID parameter.
Choose from the following:
Enabled: The VLAN Assignment is Enabled.
Disabled: The VLAN Assignment is Disabled.
Secure VLAN: This field is inactive
Guest VLAN ID: This parameter specifies the VLAN ID that is
designated as a Guest VLAN. The range is 0 to 4000 where 0 is
disabled.
When a supplicant account is created on the RADIUS server, a
VLAN identifier must be entered along with a username and
password combination or MAC address information. If the switch
receives a valid VLAN ID or VLAN name from the RADIUS server,
it moves the authenticator port to the designated Guest VLAN and
changes the port to the authorized state.
Transmission Period: Sets the switch-to-client retransmission
time for EAP request frames. The range is 1 to 65535 seconds.
Quiet Period: Sets the number of seconds that authenticator ports
wait after a failed authentication before accepting authentication
requests again. The range is 1 to 65535 seconds.
Supplicant Timeout: Sets the switch-to-client retransmission time
for EAP request frames. The range is 1 to 65535 seconds.
Maximum Request: Specifies the maximum number of times
authenticator ports transmit EAP Request packets to clients before
timing out authentication sessions. The range is 1 to 10.
Re-authentication Period: Specifies the time interval for
reauthentication of clients on an authenticator port. The range is 1
to 65535 seconds
Server Timeout: Sets the length of time the switch waits for a
response from the authentication server. The range is 1 to 65535
seconds.
7. To permanently save your changes, select Save Configuration to
Flash from the main menu on the left side of the page.