Filter
Top Products
SwitchBlade x3112 Installation Guide
119
Figure 76. Tightening the Thumb Screws on the AT-SBx31CFC Card
9. Tighten the screws with a # 2 Phillips-head screwdriver to secure the
control card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
10. if you have a second AT-SBx31CFC Central Fabric Controller card,
repeat steps 1 to 9 to install it in the chassis.
11. Go to “Installing the Ethernet Line Cards” on page 120.