Filter
Top Products
AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT Switches Installation Guide
37
6. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 30. This secures the transceiver and prevents it from
being dislodged from the slot.
Figure 30. Positioning the SFP Handle in the Upright Position
7. Eject SFP transceivers, as shown in Figure 31. First lower the SFP
Transceiver Handle, then gently remove the SFP Transceiver.
Figure 31. Ejecting an SFP transceiver after lowering the SFP Handle to
the Downwards Position
8. Repeat steps 2 through 6 to install additional SFP transceivers.
1983
R
R
SFP Transceiver
Handle
15R
16R
15
16
15
16
AT-x210-16GT
Gigabit Ether
net Switch
L/A
LINK /
ACT
SFP
CLASS 1
LASER PRODUCT