Filter
Top Products
SWITCHER
400-0365-005
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MX2106AV Switcher. Keep this manual handy for
future reference. These safety instructions are to
ensure the long life of your MX2106AV and to
prevent fire and shock hazards. Please read them
carefully and heed all warnings.
1.1 GENERAL
• Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
1.3 INSTALLATION
• For best results, place the MX2106AV on a flat,
level surface. Keep in a dry area away from dust
and moisture.
• To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
MX2106AV in direct sunlight, near heaters or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
• Handle the MX2106AV carefully. Dropping or
jarring can damage internal components.
• Do not place heavy objects on top of the
MX2106AV.
• To turn off the main power, be sure to remove
the cord from the power outlet. The power outlet
should be installed as close to the equipment as
possible, and should be easily accessible.
• Do not pull the power cord or any cable that is
attached to the MX2106AV Switcher.
• If the MX2106AV is not used for an extended
time, disconnect the power cord from the outlet.
1.4 CLEANING
• Unplug the MX2106AV power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC NOTICE
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference, including interference
that may cause undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
equipment is operated in a commercial
environment. This equipment generates and
uses radio frequency energy. If not installed and
used in accordance with the instructions found
herein, it may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.