Altinex CP451-008 Network Card User Manual


 
SPECIAL APPLICATION
400-0518-001
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
CP451-008 and keep it handy for future reference.
These safety instructions are to ensure the long life
of your CP451-008 and to prevent fire and shock
hazards. Please read them carefully and heed all
warnings.
1.1 GENERAL
Do not open the unit or power supply case, there
are high-voltage components inside.
There are no user serviceable parts inside.
Qualified ALTINEX service personnel must
perform all service on the CP451-008.
Handle the CP451-008 carefully.
1.2 HANDLING
For best results, place the CP451-008 in a dry
area away from dust and moisture.
To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the
CP451-008 in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.
Handle the CP451-008 carefully. Dropping or
jarring can damage the unit.
Do not pull any cables that are attached to the
CP451-008.
Do not place heavy objects on top of the
CP451-008.
If the CP451-008 is not used for an extended
period, disconnect the adapter from the wall to
avoid fire, shock, and loss of power.
1.3 CLEANING
Unplug the CP451-008 adapter before cleaning.
Clean only with a dry cloth. Never use strong
detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.
1.4 FCC NOTICE
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.