Altinex DA1926AV Network Card User Manual


 
INTERFACES
3
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.
ABOUT YOUR INTERFACE 2
There are a great variety of computers and
computer video cards on the market today. There
are also numerous data monitors and large screen
data projectors. When displaying a computer
image on a large screen data projector or on a
large screen monitor, it often becomes clear that
some computers are not always compatible with
these display devices. The
VA6803SX/ VA6804SX/
VA6805SX/DA1926AV
Computer Video Interface
that you have just purchased from
ALTINEX is
designed to resolve this incompatibility.
Interface Capabilities
The
VA6803SX/VA6804SX/VA6805SX/DA1926AV
is a high resolution computer video interface with
stereo audio designed to allow the connections of
VGA, SVGA, XGA, UXGA, MAC, SUN, SGI, and
other analog computer video sources to scan rate
compatible monitors, projectors, and LCD displays.
The
VA6803SX/VA6804SX/VA6805SX/DA1926AV
amplifies video signals and converts sync to
various formats. It does not change the scan-rate
or the resolution of the video signal. The computer
and projector must be scan rate compatible with
each other.
The
VA6803SX/VA6804SX/VA6805SX/DA1926AV
input is VGA compatible. The
VA6803SX/
VA6804SX/VA6805SX/DA1926AV
provides two
fully buffered outputs: a main output on 5 BNC
connectors provides RGBHV, RGBS, or RGsB, and
a pass-through 15-pin HD monitor output. The
monitor output is typically used to transmit signals
to a local monitor. If the input signal format is
RGBS or RGBHV, the main output may be
RGBHV, RGBS, or RGsB. If the input signal is
RGsB, the output must be RGsB. The
VA6803SX/VA6804SX/ VA6805SX/DA1926AV
is
not designed to separate sync from green.
The
VA6803SX/VA6804SX/VA6805SX/DA1926AV
is capable of equalizing the attenuation effects of
long cable runs, up to 300 feet or more depending
upon the type of cable. The
VA6803SX/
VA6804SX/VA6805SX/DA1926AV
accepts stereo
audio input and offers balanced or unbalanced
stereo audio output on a terminal block connector.
There is a 3.5mm jack for computer audio input,
which may be returned to the local audio system
with a 3.5mm jack for buffered stereo audio output.
A 5-pin terminal block is available for stereo audio
transmission to the main sound system. These
connectors are easily adaptable to stereo mini or
RCA type connectors.