Filter
Top Products
MULTI-TASKER
400-0401-001
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MT100-108 12-Slot Multi-Tasker™ Enclosure.
Keep this manual handy for future reference.
These safety instructions are to ensure the long life
of your MT100-108 12-Slot Multi-Tasker™
Enclosure and to prevent fire and shock hazard.
Please read them carefully and heed all warnings.
1.1 GENERAL
• Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
1.2 INSTALLATION
• To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the MT100-108
in direct sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
• Handle your MT100-108 carefully. Dropping or
jarring can damage the unit. If the MT100-108 is
not used for an extended period, disconnect the
power cord from the power outlet or turn off the
main connection.
1.3 RACK-MOUNT INSTALLATION
• Use only ALTINEX supplied rack-mount ears for
mounting the MT100-108 into a rack.
• The maximum operating ambient temperature is
35ºC (95ºF).
• When installing the MT100-108 into a rack,
distribute individual units evenly, otherwise
hazardous conditions may be created by an
uneven weight distribution. This will reduce heat
build up and will prolong the life of the
MT100-108. Power should be connected using
provided 3-prong power cord only. Furthermore,
make sure that the rack is properly grounded.
1.4 CLEANING
• Unplug the MT100-108 power cord before
cleaning.
• Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as, alcohol or
thinner. Do not use a wet cloth or water to clean
the unit.
1.5 FCC NOTICE
• This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference that may cause
undesired operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.