Altinex MT105-100 Switch User Manual


 
MULTI-TASKER
400-0131-004
22
22
TROUBLESHOOTING GUIDE 8
We have carefully tested and have found no
problems in the supplied MT105-100/101; however,
we would like to offer suggestions for the following:
8.1 NO DISPLAY
Cause 1: The source has a problem.
Solution: Check the source and make sure a
signal present and all source
connections correct. If the source is
working, see Cause 2.
Cause 2: The card input is not selected.
Solution: Select the card input. See RS-232
accessible commands in section 7.If
no display is present, see Cause 3.
Cause 3: Cable connections are incorrect.
Solution 1: Make sure that cables are
connected properly. Also, make sure
that the continuity and wiring are
good. If there is still no display
present, see Cause 4.
Cause 4: The display has a problem.
Solution 1: Make sure the display is powered. If
there is still no display, call
ALTINEX at (714) 990-2300.
ALTINEX POLICY 9
9.1 LIMITED WARRANTY/RETURN POLICY
Please see the Altinex website at
www.altinex.com for details on warranty and
return policy.
9.2 CONTACT INFORMATION
ALTINEX, INC
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com