Filter
Top Products
DESIGNER SOLUTIONS
400-0520-001
9
INSTALLING YOUR SP107-101/101C 6
Step 1. Cut an opening into the furniture’s
surface.
Note: The furniture can be 3” or less in
thickness. Always confirm dimensions
before cutting to insure that specifications
have not changed.
Step 2. Insert the SP107-101/101C into the table
cutout.
Step 3. Refer to Diagram 3 and from underneath
the furniture surface, attach the mounting
brackets to the 6-32 studs on the bottom
side of the SP107-101/101C using the
screws provided.
NOTE: If the surface is too thick for the
screws provided, longer 6-32
screws can be used.
Step 4. Secure the audio/video cables by using
cable clamps, tie wraps, or other standard
mounting hardware. Pass the power cord
from the bottom of the housing and attach
it to the furniture separately from the
audio/video cables.
Step 5. Connect the appropriate cables with the
correct input connectors on the bottom of
the unit.
Step 6. The SP107-101/101C is now operational.
OPERATION 7
The SP107-101/101C requires no adjustments for
performance. Once set-up, the SP107-101/101C
will work trouble-free without user intervention.
Connect external devices to the appropriate
connector on the SP107-101/101C.
TROUBLESHOOTING GUIDE 8
The SP107-101/101C supplied was carefully tested
and no problems were detected. However, we
would like to offer the following suggestions:
• Please make sure that the highest quality
network cables are used.
• Make sure that no cable or power cord is
damaged or pinched. If there has been damage,
do not use the SP107-101/101C. Please call the
ALTINEX Customer Service Department at
(714) 990-2300 to have the unit repaired.
ALTINEX POLICIES 9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
www.altinex.com for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com